Big Boyz Head Porting  


Today I started on the front end conversion. On the stock front end the wire go through the top triple tree. Rather than removing all the wires from the connector, I decided to cut the triple tree to get the wires out.

I took this picture after I cut the piece out but it shows the cluster of wires.

I used a sawzall and carefully cut about 3/4 of the way through the aluminum in front of the wires. I didn't want to risk cutting any wires.

I then used a small ball pean hammer and broke the aluminum piece out of the way.

** Terms Of Use **

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C)2000-2024 Big Boyz Head Porting
vB Ad Management by =RedTyger=

hit counter html code
hit counter javascript